top of page

Mount Upgrade Kit

OVERVIEW

The Revo mount upgrade kit is designed to improve the driving experience of your vehicle.

Power development on the EA888 2.0L engine quickly uncovered problems with severe engine movement. The fluid-damper design of the stock engine/transmission mounts and air gap design of the lower torque mount become overtaxed with increased power, numbing the driver of critical vehicle feedback and absorbing useable power.

The Revo mount system includes replacement engine and transmission mount assemblies, as well as a replacement lower torque arm and lower bushing insert. Precision-machined aluminium/stainless steel parts and Powerflex polyurethane bushings manage the movement of uprated engines, transferring more energy to the wheels versus the OEM mounts. The polyurethane bushing design provides a more connected feeling for the driver during spirited drives, reducing engine movement and stiffening up the front of your vehicle.

 

ENGINE MOUNT

Several specific details set the Revo engine mount apart from similar kits. The engine mount bushings, mounting arm and base plate are all specifically sized to provide clearance to the engine block bracket. The mounting arm locator is machined to 0.30mm tolerance to provide engagement to the stock mounting bracket without any interference. Each kit includes a variety of brackets and spacers designed to provide new mounting points for every part previously mounted to the stock assembly. The Type II hard aluminium anodizing, powder-coated steel parts and stainless steel non-critical hardware provide excellent corrosion protection while the Grade 10.9 steel bolts provide OE level strength.

 

TRANSMISSION MOUNT

As with the engine mount, several specific details set the Revo transmission mount apart. The mount base plate is designed to incorporate the Revo bushings while providing clearance to the chassis frame rail. Several prototypes were used to adjust the overall height of the assembly, optimizing clearance to the wiring tray mounted above and frame rail below. The same Type II hard anodizing and custom length Grade 10.9 bolts provide OE level strength and corrosion resistance. 

 

PENDULUM MOUNT

Long-term prototype testing revealed several key elements integrated into the Revo pendulum mount. High durometer link bushings are used to keep but decrease compliance at the stock location, thereby reducing accelerated wear on the stock sub-frame mount while still reducing engine movement. Close manufacturing tolerances are held on the rear of the pendulum mount arm, ensuring perfect fitment into the stock sub-frame mount on every vehicle. Prototype testing revealed that even high-spec. hard anodizing succumb to the combination of heat/road debris over time and fades, leaving the bare aluminium exposed to the elements. As such, both exposed aluminium pieces are powder coated and stainless steel bolts used to ensure corrosion resistance.

 

 

VAG 2.0TSI/TFSI (2003-2013) mount set. (Engine, Gearbox & Torque mounts)

Artikelnummer: RV511M500102
650,00 €Preis
  • FITMENT

     Engine / Transmission / Pendulum Mount

    Manufacturer Model Engine Year
    VW Golf Mk5 2.0 TFSI 2003 - 2009
    VW Golf Mk6 2.0 TFSI / TSI 2008 - 2013
    VW Jetta 2.0 TFSI 2005 - 2011
    VW Beetle 2.0 TSI 2012 >
    VW EOS 2.0 TSI 2006 >
    VW Scirocco 2.0 TFSI / TSI 2008 >
    Audi A3 (8P) 2.0 TFSI 2003 - 2012
    Audi S3 (8P) 2.0 TFSI 2006 - 2012
    Audi TT / TTS (Pendulum Mount Doesn't fit this vehicle)  2.0 TFSI / TSI 2007 - 2014
    Seat Leon 2.0 TFSI / TSI 2005 - 2011
    Skoda Octavia 2.0 TFSI / TSI 2004 - 2013
bottom of page